---
title: "Acoustic Panel Printing in Dubai | Printed Wall Panels"
description: "UV printing onto acoustic panels in Al Quoz, Dubai, without sealing the surface that absorbs sound: PET felt, fabric-faced, slatted and perforated panels."
url: https://www.sunstudio.ae/services/acoustic-panel-printing-dubai/
type: service
site: Sun Studio, Dubai
---
# Acoustic Panel Printing in Dubai

Sun Studio prints artwork in UV ink **onto acoustic panels** at our studio in Al Quoz, Dubai: PET felt, fabric-faced, slatted timber and perforated panels. A wall that has to absorb sound can then carry a graphic instead of being a grid of plain grey rectangles.

Printed acoustic panels go into offices and meeting rooms, recording and content studios, schools and universities, clinics, restaurants and hotel interiors across the UAE: anywhere the acoustic treatment is visible and therefore part of the design. The panels come from you, your fit-out contractor or your acoustic supplier, and there is no minimum order.

![A charcoal acoustic panel printed with fine gold and white chevron lines on the flatbed bed](https://www.sunstudio.ae/svc/acoustic/acoustic-printed-panel-01.jpg)

## What we can print on

Acoustic panel is a category, not a material, and the facing is what we are actually printing on:

- **PET felt panels**: the pressed polyester board used across modern offices, and the most common request.
- **Fabric-faced panels**: where the print goes onto the facing textile over the absorbent core.
- **Slatted and grooved timber acoustic panels**: where the print is on the timber or MDF face rather than on the absorber behind it.
- **Perforated board**: where the perforations do the acoustic work and must stay open.
- **Panel sets and repeating layouts**: artwork split across several panels to make one image on a wall.
- **Baffles and hanging elements**: printed on both faces where they are seen from both sides.
- **Sample panels**: printed before a room's worth is committed.

## Printing capabilities

The governing rule here is different from every other substrate: the print must not close the surface that does the acoustic work.

- **Direct UV printing**: cured onto the panel face.
- **Controlled ink coverage**: laying enough ink for the image without flooding and sealing an open or perforated surface.
- **Full-colour artwork**: photographic images, pattern, brand graphics and large-scale typography.
- **Artwork split across panels**: one image running over a set, registered panel to panel.
- **Print on both faces**: for baffles and free-hanging elements.
- **Colour matching to a scheme**: panels printed to sit with the rest of the interior finishes.
- **Sample-first working**: strongly recommended here, because the facing varies so much between products.

*Printed onto the panel face. Coverage is controlled so the surface is not sealed shut.*

## Printed panels or a graphic applied over them

The alternative to printing the panel is applying a printed film or fabric over it. On an acoustic wall that choice has a consequence that is easy to miss.

### Applied film over a panel

A vinyl or laminate applied over an acoustic panel puts a continuous, non-porous sheet across the face.

That is the problem: an absorber works by letting sound into the material. Seal the face and you have a decorated board that no longer does the job it was specified for. If acoustic performance is in the specification, this route can quietly undo it.

### Printing onto the panel

Direct printing puts ink on the face without laying a continuous film over it, so the surface stays open and the panel keeps working, provided coverage is controlled. That is the part that takes judgement.

Heavy, flooded ink coverage on a felt or perforated face can itself begin to close the surface. That is why we print samples for acoustic work more often than for anything else, and why the artwork and the panel type are discussed together rather than separately.

## Who this is for

Acoustic work reaches us from:

- **Interior designers**: treating acoustic panels as a visible finish rather than a technical necessity.
- **Fit-out contractors**: acoustic packages inside an office or hospitality programme.
- **Offices and corporate interiors**: meeting rooms, phone booths and open-plan treatment.
- **Recording, podcast and content studios**: where the treatment is the room's visual identity.
- **Schools and universities**: classrooms and halls.
- **Restaurants, hotels and clinics**: noise control in spaces that still have to look finished.

## What to send before we can quote

The facing matters more than the dimensions here, so lead with it:

- **The panel product**: PET felt, fabric-faced, slatted timber, perforated board. The manufacturer and product name if you have it.
- **A sample panel** if at all possible. This is the one service where we would genuinely rather have a physical piece.
- **Panel dimensions** and thickness.
- **Quantity**, and whether the artwork runs across a set or repeats per panel.
- **The artwork**, and how it should be laid out across the wall.
- **Whether acoustic performance is specified**: an NRC or similar figure in the spec changes how we approach coverage.
- **Where the panels are going**, and whether they are seen from both sides.

## How it works

**Step 1**

Send

Panel product, sizes, quantity and artwork, plus a sample panel if you can.

**Step 2**

Review

We check the facing and the artwork together, and how coverage should be handled.

**Step 3**

Sample

We print a test panel. On acoustic work this is the norm rather than the exception.

**Step 4**

Produce

The set is printed, registered panel to panel, checked and packed.

## Printed acoustic and panel work

Sun Studio work, printed direct onto the panel in Al Quoz.

![Acoustic panel printing at Sun Studio Dubai](https://www.sunstudio.ae/shots/svc-acoustic.jpg)

![A matte black acoustic panel printed with gold and white chevron pinstripes, lying on the printer bed](https://www.sunstudio.ae/gallery/decor-04.jpg)

![A bonded rubber crumb acoustic panel printed direct, the granular surface still open under the ink](https://www.sunstudio.ae/svc/textile/textile-printed-01.jpg)

## Technical considerations

Every other substrate on this site is judged on how the print looks and how well it sticks. An acoustic panel has a third test: it still has to absorb sound afterwards.

What that means in practice:

### Do not seal the surface

Absorption depends on sound entering the material. Flooding an open felt or a perforated face with ink starts to close it, so coverage is deliberately controlled.

### Perforations stay open

On perforated board the holes are the acoustic function. Artwork is handled so they are not bridged.

### The facing is the substrate

PET felt, woven fabric and a timber slat face are three completely different printing problems, and the panel brand matters.

### Texture

Felt and fabric are not flat. Fine detail and small type behave differently on them than on a rigid board, and artwork should be chosen accordingly.

### Absorbency

A felt face takes ink into the fibre. Colour reads differently than on a sealed panel, which is another reason to sample.

### Registration across a set

An image running over several panels has to line up on the wall, so panel order and installation sequence need to be agreed up front.

### If a spec sets an acoustic figure

Tell us. A panel with a stated NRC is a performance component, and the print should not be what compromises it.

## Common questions

### Can acoustic panels be printed?

Yes. Artwork is printed directly onto the panel face, so an acoustic wall can carry an image instead of being plain. The important part is controlling ink coverage so the surface that absorbs sound is not sealed shut.

### Does printing affect the acoustic performance?

It can, if it is done badly. Absorption depends on sound getting into the material, so a continuous applied film or flooded ink coverage will reduce it. Printed with controlled coverage, the surface stays open. If your specification states an acoustic figure, tell us so we can work to it.

### What types of acoustic panel can you print?

PET felt board, fabric-faced panels, slatted timber acoustic panels and perforated board are all printable, but they are very different surfaces. The panel product name is the most useful thing you can send us.

### Do you supply the acoustic panels?

No. We print panels that you, your fit-out contractor or your acoustic supplier send to the studio in Al Quoz. Choose the panel for its acoustic performance first, then tell us the manufacturer and product name so we can check how its facing takes ink before you order the full quantity.

### Do you need a sample panel?

For acoustic work, yes, wherever possible. Facings vary far more between products than they do for rigid substrates, and a printed test on your actual panel is the only reliable way to agree colour and coverage.

### Is there a minimum order for printed acoustic panels?

No. One feature panel, a test piece or a full room set are all normal jobs. The quotation depends on the panel product and its facing, the panel sizes, the quantity, the ink coverage, and whether the artwork repeats or runs across the set, not on reaching a quantity.

### Can you print onto panels that are already installed?

No. Panels are printed flat at the studio, before installation. If the wall itself needs a graphic and the panels are already up, direct wall printing is a different service and may suit.

### What artwork should I send for felt and fabric panels?

Vector files (AI, EPS or PDF) with type outlined for logos, pattern and lettering, and high-resolution images at the finished size for photographs. Choose artwork with some scale: felt and fabric are textured, so very fine detail and small type do not hold as they would on a rigid board. For a set, send the wall layout with the panel sizes.

## Acoustic Panel Printing projects

Real Sun Studio work involving this service. [See the full portfolio](https://www.sunstudio.ae/portfolio).

![An oval ceiling recess printed with a misty forest scene inside a white moulded frame](https://www.sunstudio.ae/cases/dome-acoustic.jpg)

*[**Private residence**](https://www.sunstudio.ae/portfolio/printed-dome-ceiling-private-residence-dubai/): A printed domed reception ceiling.*

## Technology used

**IQDEMY EVO 2500**: the belt flatbed used for panel work, with coverage controlled so the surface stays open. [See the full printer fleet](https://www.sunstudio.ae/printers).

Sun Studio belongs to the same Dubai group as PRO TECHnology, which distributes IQDEMY equipment in the Middle East, so read our view of the machine with that in mind.

## Related services

- [Ceiling Dome Printing](https://www.sunstudio.ae/services/ceiling-dome-printing-dubai/) (Service)
- [Wall Printing](https://www.sunstudio.ae/services/wall-printing-dubai/) (Service)
- [Interior & Fit-Out Printing](https://www.sunstudio.ae/services) (Service)
- [Wood & MDF Printing](https://www.sunstudio.ae/services/wood-mdf-printing-dubai/) (Service)

## Related insights

- [What Can You Print on Acoustic Panels? Logos, Photos and Patterns for UAE Interiors](https://www.sunstudio.ae/insights/what-can-you-print-on-acoustic-panels-uae/) (Materials & surfaces)
- [Office Wall Branding & Retail Wall Graphics in Dubai](https://www.sunstudio.ae/insights/direct-wall-printing-for-offices-retail-experiential-branding/) (Wall printing)
- [How Direct-to-Wall Printing Works: Surfaces, Preparation, Print Quality & Time](https://www.sunstudio.ae/insights/direct-to-wall-mural-printing-dubai/) (Wall printing)
- [Printing for Luxury Brands in Dubai: What to Specify](https://www.sunstudio.ae/insights/luxury-brand-printing-services-the-2026-guide-to-direct-to-surface-excellence/) (Perfume & packaging)

---

*This is the Markdown rendering of a page on sunstudio.ae. The canonical version is the HTML at https://www.sunstudio.ae/services/acoustic-panel-printing-dubai/.*

**Sun Studio**: direct-to-surface UV printing. Al Quoz First, Dubai, United Arab Emirates.  
Phone and WhatsApp +971 4 346 7422 · info@sunstudio.ae · [https://www.sunstudio.ae/contact/](https://www.sunstudio.ae/contact/)

A curated index of this site for agents: https://www.sunstudio.ae/llms.txt