Meeting Room Glass Printing for the PRO TECHnology Office
PRO TECHnology wanted its meeting room to carry the brand without a logo stuck on every surface. Sun Studio printed the pattern directly onto the glass that encloses the room.
Six panels, each 2.4 metres tall and a metre wide, running the full length of the wall. PRO TECHnology is our own parent group, so this one was built at home.
Project snapshot
- Client
- PRO TECHnology (Sun Studio’s parent group)
- Location
- Dubai
- Material
- Glass partition panels
- Printing service
- Glass printing
- Application
- Meeting room partition branding
- Quantity
- Six panels
- Panel size
- 2.4 metres tall by 1 metre wide
- Production
- Direct UV printing onto the glass
The brief
Meeting room glass has two jobs at once. It has to give the room separation without sealing it off from the floor, and it has to carry brand identity without turning into signage.
Our approach
The pattern was printed onto the glass itself rather than applied as a film, so there is no edge to catch and nothing to lift where the panels are handled.
Coverage was set to break sightlines without closing the room off, so the partition still reads as glass from the floor.
Production detail
This is the most handled glass in any office — hands, chair backs, cleaning every single day — so the print has to survive contact rather than merely look right on the day it goes up. Glass is smooth and non-porous, so adhesion depends on the surface condition, the cleaning and the pre-treatment before any ink is laid.
The result
A meeting room that is recognisably PRO TECHnology from across the floor, with a printed surface that holds up to being touched every day.
Have glass to print?
Send the panel schedule: sizes, thickness, quantity and the artwork. Glass is printed after it is cut, drilled and toughened.
