Custom Suitcase and Luggage Printing in Dubai: Names, Logos and Raised Designs
Your name, a logo or a complete design printed direct onto a hard-shell suitcase at our studio in Al Quoz, Dubai: full colour on light or dark shells, raised detail you can feel, and a varnish on top. One case, a matching pair, or a corporate run.
Can you print your name or design on a suitcase in Dubai?
Yes. Sun Studio prints direct onto hard-shell suitcases with UV ink at our studio in Al Quoz, Dubai: a name, initials, a logo or a complete design, in full colour, with raised detail where you want it and a varnish over the top. One case, a matching pair or a corporate run.
In short:
- Method: direct UV printing; the ink is cured by UV light on the shell as it prints, with no sticker, film or transfer.
- Cases: hard-shell suitcases and cabin cases; polycarbonate and ABS print well once cleaned, polypropylene needs pre-treatment first.
- Colour: full colour on light or dark shells, with white ink under the colour on a dark case.
- Texture: raised ink for details you can feel.
- Protection: a UV-cured varnish over the design takes everyday rubbing.
- Minimum order: none for UV printing done in our studio.
- Where: printed in Al Quoz First, Dubai, for customers across the UAE.
The suitcase on this page is our own work: a black cabin case printed as a tuxedo, with a name on the pocket and a Scorpio constellation at the hem.
The tuxedo suitcase: what was printed, and how
The case is a black hard-shell cabin case. The design turns its front into a dinner jacket: cream lapel lines, a pleated white shirt front with buttons, a bow tie in gold tones, a silver sprig with gold berries as a boutonnière, a pocket panel carrying the name haitham in gold script, and a gold Scorpio constellation near the bottom corner.
Three things make it work on a black shell:
- White first. UV ink is translucent, so every light part of the design (the shirt, the bow tie, the lines) has white ink printed under it. Without it, the colour would sink into the black.
- Layers where you touch. The sprig, its berries and the shirt buttons are built up in raised ink, so they stand off the shell.
- The design respects the case. Everything sits on the flat front face, clear of the wheels, the handle housing, the lock and the corners that take the knocks.
Which suitcases can be printed?
Most hard-shell suitcases can be printed, as long as the shell takes ink and the front face is smooth enough for the detail you want. The shell material decides the preparation; the surface decides how fine the detail can be.
| Shell material | How it prints | What to know |
|---|---|---|
| Polycarbonate (PC) | Prints well once cleaned | The most common material for hard-shell cases; check the label inside the lining |
| ABS and PC/ABS blends | Prints well once cleaned | Often found on lighter-weight and lower-priced cases |
| Polypropylene (PP) | Rejects ink until it is treated | Needs flame, plasma or primer treatment first; see why some plastics reject ink |
| Ribbed or textured shells | Ink follows the surface | Deep ribs break up fine lines and small text; a smooth panel suits names and detail best |
| Matt or soft-touch finishes | Depends on the coating | We test adhesion on the actual shell before the design goes on |
| Aluminium, soft-side fabric and leather trims | Case by case | Send photos and the maker's details; we tell you before quoting whether we can print it |
Size is rarely the limit. A case lies on its back on the flatbed and the design prints on the front face; our Direct Color Systems UV44 has a 130 × 130 cm bed and takes objects up to 30 cm tall, which suits cabin cases. Send the dimensions of a larger case and we confirm the fit.
What you can print on a suitcase
- Names and initials, in English, Arabic or both, in any font you choose.
- A full design: a theme across the front, as on the tuxedo case, or a pattern, an illustration or a photograph.
- Personal marks: a star sign, a date, a flag, a crest or a short line of text.
- Logos and brand colours for staff, crew, team or VIP gifts.
- Matching sets: a pair for a couple, or a family set where each case carries its own name, which also makes your own case easy to spot on the belt.
No artwork yet? Our design help page explains what we can prepare from an idea, a sketch or a photo.
Raised (embossed) printing on a suitcase
Raised printing builds height by printing UV ink in the same place again and again, curing each layer as it lands, until the design can be felt. Nothing is pressed into the shell, so the case is not weakened or dented. The effect is often called embossed, 3D or textured printing.
We can build up to about 6 mm of relief, but a suitcase needs far less. Low relief on the details that matter, such as buttons, berries, the strokes of a monogram or the outline of a logo, gives the touch without creating edges that catch on belts and other bags. Raised areas take more press time, so mark on your artwork exactly which parts should stand up. How the layers are built is covered in raised and 3D embossed UV printing.
Is a printed suitcase scratch resistant?
It resists everyday rubbing well, because a UV-cured varnish over the colour takes the wear. It is not knock-proof: a hard, sharp contact can mark any finish, printed or not.
The varnish is a sacrificial layer: sleeves, cloths, car boots and the side of the next bag slide over it rather than over the colour. What it cannot stop is a point load, such as a buckle, a metal corner or grit dragged across the shell under weight. That is why the design stays off the corners and edges, and why a cabin case that stays with you keeps its print best.
For a case you check in, a clear or printed luggage cover protects the print from the conveyors and the hold. Clean the case with a soft cloth and mild soap and water; keep scouring pads, abrasive creams and solvents off the print. What decides how long a print lasts on any object is set out in how long UV printing lasts.
Direct print vs stickers vs luggage covers
Print direct when the design should be part of the case, with raised detail and no edges to lift. Choose a sticker for a temporary look, and a cover when the priority is protecting a checked bag.
| Direct UV print | Vinyl sticker or skin | Printed luggage cover | |
|---|---|---|---|
| Where the design sits | On the shell itself | On film stuck to the shell | On a fabric sleeve over the case |
| Raised detail you can feel | Yes, built in ink | No | No |
| Edges | No edges to lift | Edges can lift and collect dirt | Elastic hem around the frame |
| Names and Arabic script | Any wording, any script, in the design | Cut or printed on the film | Printed on the fabric |
| Removable | No: plan it as permanent | Yes, with some risk to the finish | Yes, it slips off |
| Minimum order | None in our studio | Varies by supplier | Varies by supplier |
| Best for | A case that is the gift itself, names, logos, raised detail | A temporary look | Protecting a checked bag in the hold |
Wedding, gift and corporate suitcases in the UAE
- Weddings: in many Gulf weddings the bride receives a suitcase of gifts from the groom's side. A printed case with both names, a monogram or the wedding date makes the case part of the gift. A matching pair for the bride and groom works for the honeymoon too.
- Personal gifts: graduations, birthdays, retirements and a first trip abroad, with a name or a star sign, as on the tuxedo case.
- Children's cases: a name and a favourite character or animal they can recognise.
- Corporate gifts: executive and VIP gifts, long-service awards, and cases for crews, teams and delegations travelling together, with the logo or the name of each traveller. See corporate gift printing in Dubai and our guide to corporate gifting in the UAE.
How suitcase printing works at Sun Studio
- Send photos of the case (front, side and the material label inside), its dimensions, your name or artwork and the quantity.
- We check the shell, its finish and the front face, and lay the design out to clear the wheels, handle, lock and corners.
- You approve the artwork on a proof. For a run of cases, one case is printed first for your approval.
- We clean the shell, treat it if the material needs it, and print: white base, colour, raised layers and varnish, all cured by UV light.
- You collect from Al Quoz, or we arrange delivery within the UAE. The date comes with the quote, since it depends on the design, the raised areas and the quantity.
What to send for a quote
- Photos of the case: the front, one side and the material label inside the lining
- The make, model and dimensions, if you know them
- The name, wording or logo, ideally as a vector file
- Any parts that should be raised
- The quantity, and whether the cases are a pair, a set or a corporate run
- Your deadline, such as a wedding or a travel date
Common questions
Can you print my name on my suitcase in Dubai?
Can you print an Arabic name on a suitcase?
Can any suitcase be printed?
Will the print scratch off at the airport?
What is raised or embossed printing on a suitcase?
Can you print on a dark or black suitcase?
Is there a minimum order for printed suitcases?
How long does it take to print a suitcase?
Can you print a company logo on luggage for staff or clients?
Will printing affect my suitcase warranty?
How do I clean a printed suitcase?
Have a suitcase to personalise?
Send photos of your case and the name or design, and we will tell you what the shell takes and how the design will sit before anything is printed. Sun Studio has printed direct onto finished objects from Al Quoz First, Dubai, since 2011, with no minimum order.
Sun Studio LLC
Al Quoz First, Dubai, United Arab Emirates
Call: +971 4 346 7422
Email: info@sunstudio.ae