← All insights
Materials & surfaces 16 Nov 2026 11 min By Digital Printing Expert

Large Acrylic Sheet Printing in Dubai: Full Colour, Fine Detail and a Gloss or Matte Finish

How we print large acrylic sheets in full colour on our Swiss belt press, why white acrylic makes colour bright, what decides the detail, and when to choose a gloss or a matte varnish. From our studio in Al Quoz, Dubai.

A white acrylic sheet printed in full colour with a blue sky, white clouds and branches of white blossom, lying on the belt of a UV flatbed press in the Sun Studio workshop

Short answer: we print large acrylic sheets directly in UV ink, in full colour, on our IQDEMY EVO 2500, a Swiss belt flatbed 2.5 metres wide with no machine limit on length. Sheets up to 4 x 8 ft also run on our Direct Color Systems UV84. On white acrylic the sheet itself is the white, so colour prints bright and clean. A gloss or a matte varnish can go over the print, and a sample shows which suits the room.

At a glance:

  • Size: a sheet wider than 1.2 m or longer than 2.4 m goes on the EVO 2500; sheets up to 4 x 8 ft run on either press.
  • Colour: white or opal acrylic gives the ink a white ground, so colour reads close to the proof.
  • Detail: it comes from the press and from the file, so send high-resolution artwork sized for the finished sheet.
  • Gloss varnish: deeper darks and richer colour; lamps and windows reflect in it.
  • Matte varnish: low glare and an even look from more angles, with slightly softer contrast.
  • Sample first: AED 105 or AED 150, usually ready in one to three working days.

A sky printed on a white acrylic sheet

The photographs and the video on this page show a recent sheet on our IQDEMY EVO 2500: white (opal) acrylic, printed on its face with a blue sky, soft clouds, the sun and branches of white blossom. The sheet lies flat on the belt and the carriage passes over it, laying the colour and curing it with UV LED light as it goes, so the ink is hard by the time the carriage moves on.

It is a demanding image to print. A sky is a long, smooth gradient from deep blue to almost white, where banding or grain would show at once, and the blossom is the opposite: small petals, fine stems and leaves in full colour against it. Both have to come out right in the same print.

The print carriage of a belt flatbed UV press over a white acrylic sheet printed with a blue sky, the sun, clouds and white blossom, its UV lamps glowing violet
Seen from the end of the press: the belt carries the acrylic through the machine, so the sheet is not limited to a fixed bed.
The carriage of our IQDEMY EVO 2500 passing over the sheet. The violet glow is the UV LED light that cures the ink as it prints.

Why colour prints bright on white acrylic

UV ink is translucent, so the colour you see is the ink plus whatever lies under it. On white or opal acrylic the sheet supplies the white: colour sits straight on a white ground and reproduces closer to how it looks on a proof, with less white ink needed underneath.

Clear acrylic has no white to fall back on. Colour printed straight onto clear sheet reads as a tint, like stained glass, and white ink goes behind any area that must look solid. Clear sheet also allows reverse printing, on the back and seen through the front, which our guide to how acrylic printing works explains. Coloured and gold-coloured sheets are different grounds again, each with its own effect on the colour.

A large white acrylic sheet printed in full colour with a sky, clouds and a branch of white blossom, seen along its length on the press
White acrylic, printed on its face: the sheet is the white, so the blue, the clouds and the blossom sit on a clean ground.

How much detail a print on acrylic holds

High definition on a print is two things at once: the detail the press lays down, and the detail in the file. A large sheet shows up both, because it is seen close as well as from across the room.

A sharp print needs a sharp file. A picture made for a phone screen, stretched across a sheet two metres wide, looks soft however it is printed. Send photographs and artwork as high-resolution files sized for the finished sheet, and logos, type and patterns as vector, with type outlined. Our artwork preparation guide covers file formats and vector conversion.

Viewing distance matters too. A wall panel seen across a lobby needs less detail than a menu board read at arm's length, so tell us where the sheet will hang and we will say what the file needs.

Close view of white blossom, green leaves and fine stems printed on white acrylic against a blue sky
The same sheet seen close: petals, stems and the edges of leaves against the sky.

Gloss or matte: which suits a printed acrylic sheet?

Acrylic has a glossy face of its own, and that is part of why it is chosen: colour on it looks clean and deep. A varnish printed over the image decides how the finished face handles light, and on the EVO 2500 we lay a gloss or a matte varnish over the print.

A gloss surface reflects light in one direction, like a mirror, so dark tones look deeper and colours richer, but a lamp or a window can show on it as a bright patch. A matte surface scatters light in many directions, so the print reads evenly from more angles with less glare, at the cost of slightly softer contrast.

FinishWhat it doesWatch forSuits
Gloss varnishAn even shine over the print: deeper darks, richer colourReflections of downlights and windowsArtwork and photographs seen face on, under controlled light
Matte varnishLow glare and an even look from the sideSlightly softer contrast; the glassy look of the acrylic gives way to a quieter surfaceBright rooms, lobbies, panels read from an angle or near a window
Ink only, no varnishThe ink is the top surface; the sheet keeps its own faceHandling wear falls on the ink itselfPieces that are not handled or cleaned often

Choose by the room before the picture: where the sheet will hang, what light falls on it and where people will stand. Then judge it on a sample. The same choice on metal is set out in our guide to aluminium print finishes.

What a gloss varnish does on acrylic

A gloss varnish gives the printed face an even shine, so colour looks rich and dark tones look deep. It suits photographs and artwork seen face on, under light that can be controlled: spotlights aimed from the side rather than straight at the sheet, and no window opposite. Like any varnish, it adds a top layer that takes handling wear.

What a matte varnish does on acrylic

A matte varnish takes the reflection off. The print reads much the same from the side as from the front, and downlights and windows show far less in it, which suits lobbies, offices, corridors and anywhere people see the sheet from an angle. It also changes the character of the acrylic: the glassy look gives way to a quieter, flatter surface, and contrast softens a little. If the glass-like look is the reason for choosing acrylic, see both finishes on a sample before deciding.

Matte varnish or matte acrylic sheet: not the same thing

A "matte acrylic print" can mean two different products. Many photo labs print on paper or film and face-mount it behind acrylic; there, a matte look comes from the sheet itself, a non-glare acrylic in front of the print. In direct UV printing the image is printed onto the acrylic and the finish is a varnish printed over it, so the same sheet can be finished gloss or matte.

The construction matters for more than the look: a face-mounted print relies on an adhesive layer between the print and the sheet, and a direct print has none. Our guide to direct printing, reverse printing and face mounting compares the three.

Large sheets: which press takes which size

Our IQDEMY EVO 2500 is a belt flatbed: the belt carries the sheet through the machine instead of holding it on a fixed bed, so it takes sheets up to 2.5 metres wide with no machine limit on length. Our Direct Color Systems UV84 has a 4 x 8 ft bed, about 1.2 x 2.4 m, and prints acrylic too, so a standard 1220 x 2440 mm sheet fits either press. Anything wider or longer goes on the EVO and is printed in one piece rather than tiled.

Size is only half of it. Flatness, thickness and handling matter as much as the raw dimensions, so send each sheet's width, height and thickness and we confirm the fit before anything moves.

Preparing acrylic for a clean print

  • Protective film: leave it on both faces until the sheet reaches us; we remove it at the press.
  • Dust and static: acrylic attracts dust the moment the film comes off, and dust under ink shows, so sheets are de-dusted immediately before printing.
  • Cut first: cutting, routing, drilling and polishing happen before printing; heat forming or bending should be discussed first, because a cured ink film and a heat bend do not always agree.
  • Cleaning afterwards: mild soap and water with a soft cloth, never a solvent cleaner and nothing abrasive, because acrylic is attacked by many solvents.

More on static, crazing and cast or extruded sheet is on our acrylic printing page.

Which finish for which piece

These are starting points, not rules: the sample decides.

PieceUsual starting pointWhy
Wall art or a photograph at homeGloss under controlled light; matte if a window faces itGloss deepens the picture; matte cuts the reflection of a window
Lobby, reception or office wall panelMatteSeen from several angles under ceiling lights
Retail or display panelGlossCatches the light at a counter or in a window; see retail display printing
Sign or menu board read at an angleMatteGlare washes out text; see signage printing

Approve the colour and the finish on a sample

Colour and finish cannot be judged on a screen. We print a sample on your acrylic, or on the sheet you have chosen, with the varnish you are considering, so colour, detail and finish can be judged together, ideally under the light where the sheet will hang. For a large panel, include the darkest, the lightest and the most detailed parts of the picture.

A sample is charged at AED 105 or AED 150, depending on what it is, and the fee comes off the invoice if you go ahead. It is usually ready in one to three working days once the artwork is approved. Keep the approved sample as the reference for the run.

Printing acrylic at Sun Studio

  • Presses: our IQDEMY EVO 2500, made in Switzerland, a belt flatbed 2.5 metres wide with no machine limit on length; and our Direct Color Systems UV84, with a 4 x 8 ft bed. See our printers.
  • Sheets: white, clear and coloured acrylic, full sheets or cut to shape. We can source the sheet on request.
  • Finishes: a gloss or a matte varnish on the EVO 2500. Raised texture and braille are built on the UV84; see raised UV printing.
  • Quantity: no minimum order. One panel is a normal job, and so is a run of identical pieces.
  • Disclosure: Sun Studio belongs to the same Dubai group as PRO TECHnology, which distributes Direct Color Systems and IQDEMY equipment in the Middle East, so read our view of the machines with that in mind.

For a quote, see acrylic printing in Dubai.

More acrylic printing from our studio

Office gallery wall of monochrome landmark prints reverse printed on 10mm acrylic
An office gallery wall in Dubai, reverse printed on 10mm acrylic: the image sits behind the sheet.
A large oval acrylic panel printed with the terrain of the UAE and the Etihad Rail route, being finished in the model workshop
The printed acrylic base of an Etihad Rail model, with the terrain built up in relief.
Luminous Shadow, a walk-through arch of layered coloured acrylic letterforms, on the lawn at Al Hili Archaeological Park in Al Ain
Luminous Shadow in Al Ain: layered coloured acrylic letterforms, with the colour printed straight onto the sheet.

Common questions

Can you print on large acrylic sheets in Dubai?
Yes. We print UV ink directly onto acrylic at our studio in Al Quoz. Sheets up to 2.5 metres wide go on our IQDEMY EVO 2500 belt flatbed, with no machine limit on length, and sheets up to 4 x 8 ft, about 1.2 x 2.4 m, also run on our Direct Color Systems UV84.
Which printer do you use for acrylic sheets?
Two. The IQDEMY EVO 2500, a Swiss belt flatbed, takes large sheets, and the Direct Color Systems UV84 takes sheets up to 4 x 8 ft and builds raised texture and braille. Both cure the UV ink as it prints.
Is a glossy or matte finish better for an acrylic print?
Neither is better in general. Gloss gives deeper darks and richer colour but reflects lamps and windows; matte cuts glare and reads evenly from more angles, with slightly softer contrast. Choose by where the sheet will hang and judge it on a sample.
Is a matte acrylic print the same as a matte acrylic sheet?
No. A face-mounted photo print gets its matte look from a non-glare acrylic sheet in front of the print. A direct UV print gets it from a matte varnish printed over the image, so the same sheet can be finished gloss or matte.
Why print on white acrylic rather than clear?
White or opal acrylic gives the ink a white ground, so colour prints bright and close to the proof with less white ink. Clear acrylic needs white ink behind anything that must look solid, and suits reverse printing seen through the sheet.
What artwork do you need for a large acrylic print?
Photographs and artwork as high-resolution files sized for the finished sheet, and logos and type as vector. A small image stretched across a large sheet looks soft however it is printed, so tell us the viewing distance and we will say what the file needs.
Can printed acrylic go outdoors?
It can, but it depends on the exposure, the sheet and the cleaning it will get. For an outdoor installation we print and test a sample rather than give a blanket assurance.
How much does printing a large acrylic sheet cost?
There is no fixed price. The quotation depends on the sheet size and thickness, the quantity, the finish and whether we source the sheet. A sample is AED 105 or AED 150, taken off the invoice if you go ahead.
Is there a minimum order for acrylic printing?
No. One sheet is a normal job, and so is a run of identical panels.

Send the artwork, the sheet size and the finish you have in mind, by WhatsApp or phone on +971 4 346 7422, or by email to info@sunstudio.ae. Sun Studio Dubai has been printing in Al Quoz First since 2011, with no minimum order.