← All insights
Materials & surfaces 16 Nov 2026 11 min By Digital Printing Expert

Aluminium Print Finishes: Gloss, Matte, Raised or Bare Metal, and How to Choose

What gloss and matte varnish, raised texture and bare metal each do to a print on aluminium, how they combine on one sheet, and how to approve the finish before the full piece. From our studio in Al Quoz, Dubai.

A black-and-white halftone street photograph printed on a sheet of smooth aluminium, seen at an angle in the Sun Studio workshop, the bare metal forming the light tones

Short answer: choose the finish by where the piece will hang and how it will be seen. A gloss varnish deepens dark tones and makes colour richer, but it reflects lamps and windows. A matte varnish cuts glare and reads evenly from more angles, with slightly softer contrast. Raised ink adds relief you can see and feel, up to about 6 mm. With no varnish over bare metal, the aluminium itself becomes the shine. At Sun Studio Dubai we print all of these straight onto aluminium, and several can sit on one sheet.

At a glance:

  • Gloss varnish: deeper darks and richer colour; lights and windows reflect in it.
  • Matte varnish: low glare and an even look; it also dulls the metal wherever it covers bare aluminium.
  • Selective varnish: gloss or matte on chosen areas only, such as a gloss logo on a matte field.
  • Raised texture: ink built up in layers, about 6 mm at most, usually in white, so it hides the metal under it.
  • Bare metal: no white under the ink, so the aluminium is the lightest tone of the picture.
  • Sample first: AED 105 or AED 150, usually ready in one to three working days.

Two finishes decide how a print on aluminium looks

Every print on aluminium has two finishes: the finish of the sheet, and the finish of the print on top of it.

The sheet can be brushed, polished, mill finish, anodised or powder coated. It decides how the metal looks wherever it is left bare, and how the ink bonds to it, which our guide to bare, anodised and powder-coated metal covers. The print finish is what lies on top: ink alone, a gloss or matte varnish across the face or on chosen areas, and raised ink. This guide is about the print finish, and how it works with the sheet underneath.

Gloss or matte: which suits a print on aluminium?

The difference is how the top surface handles light. A gloss surface is smooth and reflects light in one direction, like a mirror, so dark tones look deeper and colours richer, but a lamp or window can show on it as a bright patch. A matte surface is finely rough and scatters light in many directions, so the print reads evenly from more angles with less glare, at the cost of slightly softer contrast.

FinishWhat it doesWatch forSuits
Gloss varnishDeeper darks, richer colour, a wet lookReflections of lamps and windowsPhotographs and art seen face on, under controlled light
Matte varnishAn even, low-glare surface with softer contrastOver bare metal it takes the edge off the shineBright rooms, corridors, panels read from an angle
Ink only, no varnishThe ink is the top surface; bare metal keeps its own shineHandling wear falls on the ink itselfShow-through art and pieces that are not handled
Raised inkRelief you can see and feel, up to about 6 mmEach layer is another pass, so height adds press timeLogos, lettering, tactile detail, textured art

Neither is better in general. Decide by the room, the light and the angle the piece will be seen from, and judge it on a sample. The same choice on acrylic is set out in our guide to large acrylic sheet printing.

What a gloss varnish does on aluminium

A gloss varnish is a clear layer printed over the colour, across the whole face or only in chosen areas. On aluminium it deepens dark tones and makes colour look saturated and wet, which suits photographs and artwork seen face on.

Its weak point is reflection. A gloss panel opposite a window or under a spotlight shows that light as a bright patch, so check where it will hang before choosing it. Over bare aluminium a varnish also changes how the metal reflects, so judge that on the sample too.

What a matte varnish does on aluminium

A matte varnish scatters light, so the print reads evenly from most angles and lamps and windows do not mirror in it. That suits bright rooms, corridors, and signs and panels read from the side or from a distance.

Colour looks a little softer under matte than under gloss. Where matte covers bare aluminium, it takes the edge off the shine of the metal, which is right for some pieces and wrong for others.

A gradient-printed aluminium panel on a workbench seen at a low angle, the blue fading evenly from light to deep navy across a matte printed surface
A blue gradient printed on aluminium, seen low across a matte printed surface: even from end to end, with no glare from the workshop lights.

Gloss and matte on one sheet: selective varnish

The varnish does not have to cover everything. It can be laid only in chosen areas, which is how gloss, matte and selective shine sit on one panel. For example, a matte field with a logo or a line of type in gloss: the mark catches the light as you move past it, and the rest stays calm.

Raised ink and selective gloss or matte varnish can be built in the same run as the colour, so a selective finish does not mean a second job on the press.

Raised and embossed texture on aluminium

Raised UV printing, also called 3D embossed or textured printing, builds relief by printing and curing ink in layers, so lettering, patterns and tactile detail stand up from the sheet. Nothing is pressed into the aluminium: the metal stays flat and the relief is ink.

At Sun Studio the practical ceiling is about 6 mm. Lettering that has to stand further proud of a wall is fabrication, not print. Raised areas are usually built in white, which hides the metal there, and the colour and any varnish go on top, so a raised logo can be glossy on a matte panel.

Height is press time, because each layer is another pass, so a heavily built area is priced differently from a flat print. How the layers are built, and how braille is printed the same way, is set out in our guide to raised and 3D embossed UV printing.

Low-angle close-up of raised pink and white flowers and a scalloped border printed on gold acrylic, with a monogram R out of focus behind them
Raised print in low, raking light, here on gold-coloured acrylic. The relief is built in ink, layer by layer, the same way on an aluminium sheet.

No varnish: when the bare metal is the finish

Some pieces need nothing over the metal. With no white base under the ink, every unprinted area is bare aluminium, so the metal is the lightest tone of the picture and the source of its shine.

We printed a black-and-white photograph this way for an artist who teaches at NYU Abu Dhabi: halftone dots of dark ink on a 130 x 80 cm mirror-finish aluminium sheet, on our Direct Color Systems UV44, with the bare metal as the highlights. Ink and metal work as negative and positive, and the picture changes as the light in the room moves across it.

Whether to add a clear layer over a print like this depends on where it will hang: a clear coat changes the sheen and takes handling wear, and without one the ink itself is the top surface, as on the NYU Abu Dhabi piece. How much metal shows, and how it is controlled, is covered in our guide to aluminium prints that let the metal show through.

Close-up of halftone dots printed in dark ink on a smooth aluminium sheet, light catching the bare metal between the dots across the facade of a building in the photograph
The halftone piece for an artist at NYU Abu Dhabi up close: dark ink dots with bare aluminium between them, catching the light.

White base or bare metal under the colour

On bare, dark or reflective metal, a white base under the colour is what makes colour read true, instead of picking up the grey of the metal. Leave the white out and colour turns see-through, with the metal shining through it.

White is a real extra layer, laid before the colour, so it takes more ink and more time and it shows in a quote. On one sheet it can go under some areas and not others, so a logo can be solid colour while the background stays bare metal.

A share counter display from the side: a bent polished aluminium arch with a burgundy printed face and unprinted metal inside the curve
Polished aluminium under a see-through burgundy print: with no white under the colour, the metal shines through it.

Brushed, polished or mill finish: the sheet under the print

Wherever the metal is left bare, its own finish shows through the design:

  • Brushed: the grain reads under the image, as fine lines running through the picture.
  • Polished or mirror: the metal reflects its surroundings strongly, as on the NYU Abu Dhabi piece. A mirror finish can also reflect the press's own UV light back towards the nozzles, which is a set-up matter we allow for.
  • Mill finish: no brushed grain runs through the picture, and the shine is softer than on a mirror finish.
  • Anodised or powder coated: these take ink differently from bare metal; which finish needs a primer is set out in our metal finish guide.

Which finish for which piece

These are starting points, not rules: the sample decides.

PieceUsual starting pointWhy
Photograph or artwork for a wallGloss, or bare metal with no white; matte in a bright roomGloss deepens the picture, bare metal adds shine, matte stops windows mirroring in it
Logo plate, name plate or badgeColour on a white base, with selective gloss or raised ink on the markThe mark stands out by sheen or relief; see badges and name plates
Indoor sign or wayfinding panelMatteRead from the side and under ceiling lights without glare; see signage printing
Retail or display pieceGloss, selective varnish or see-through colour on polished metalCatches the light at a counter or window; see retail display printing
Outdoor panelDecided on a tested sampleSun, heat and handling decide it; see outdoor aluminium and ACP

How to approve a finish before the full piece

A finish cannot be judged on a screen, least of all on metal, where the shine changes with every light. We print a sample on your aluminium, or on an offcut of the same sheet and finish, so the varnish, the relief and the metal can be judged together, ideally under the light where the piece will hang.

A sample is charged at AED 105 or AED 150, depending on what it is, and the fee comes off the invoice if you go ahead. It is usually ready in one to three working days once the artwork is approved. Keep the approved sample as the reference for the run.

Printing on aluminium at Sun Studio

  • Sizes: large sheets on our IQDEMY EVO 2500, a belt flatbed 2.5 metres wide with no machine limit on length; sheets and plates up to the 4 x 8 ft bed of our Direct Color Systems UV84 (about 1.2 x 2.4 m); and smaller pieces on our UV44, with its 130 x 130 cm bed. See our printers.
  • Surfaces: bare, brushed, polished and mill finish aluminium, anodised and powder-coated aluminium, and stainless steel parts. Aluminium composite panels have their own page: ACP panel printing.
  • What we do: we print. We do not cut, fold or manufacture metal parts, so fabrication comes first and print second. We can source aluminium sheet on request, quoted as its own line.
  • Quantity: no minimum order. A single art piece or a single plate is a normal job.
  • Disclosure: Sun Studio belongs to the same Dubai group as PRO TECHnology, which distributes Direct Color Systems and IQDEMY equipment in the Middle East, so read our view of the machines with that in mind.

For a quote, see metal and aluminium printing in Dubai.

More aluminium printing from our studio

Printed aluminium display panels carrying historical photographs and text at Sharjah Heritage Museum
Printed aluminium display panels at Sharjah Heritage Museum: photographs and text printed onto the metal.

Common questions

Is a glossy or matte finish better for a print on aluminium?
Neither is better in general. Gloss gives deeper darks and richer colour but reflects lamps and windows; matte cuts glare and reads evenly from more angles, with slightly softer contrast. Choose by where the piece will hang and judge it on a sample.
Can you print directly on aluminium?
Yes. We print UV ink straight onto aluminium: bare, brushed, polished, mill finish, anodised or powder coated. Sheets up to 2.5 metres wide go on our IQDEMY EVO 2500 belt flatbed, with no machine limit on length, and plates and sheets up to 4 x 8 ft, about 1.2 x 2.4 m, on our Direct Color Systems UV84.
What is embossed or raised printing on aluminium?
Relief built by printing and curing ink in layers, so lettering, patterns and tactile detail stand up from the sheet. Nothing is pressed into the metal. At Sun Studio the practical ceiling is about 6 mm.
Can one aluminium print have gloss and matte areas?
Yes. Varnish can be laid only in chosen areas, so gloss and matte sit on one panel, and raised ink and selective varnish can be built in the same run as the colour.
Does a matte varnish hide the shine of the metal?
It takes the edge off the shine wherever it covers bare aluminium. If the metal should stay bright, leave those areas unvarnished or use gloss, and judge the effect on a sample.
Should a print on aluminium be varnished?
It depends on where it will hang. A clear coat changes the sheen and takes handling wear; without one the ink is the top surface. We decide it per job and test it on the sample.
Is a UV print on aluminium the same as a metal photo print?
No. Many metal photo prints are dye sublimated into a coated panel. We print the ink onto the metal itself, which is what lets bare aluminium show through as part of the picture.
How much does printing on aluminium cost?
There is no fixed price. The quotation depends on the size, the finish, the preparation the surface needs and whether the parts are identical. Raised height adds press time. A sample is AED 105 or AED 150, taken off the invoice if you go ahead.
Is there a minimum order for printing on aluminium?
No. A single art piece or a single plate is a normal job, and so is a batch of identical parts.

Send the artwork, the size and the finish you have in mind, by WhatsApp or phone on +971 4 346 7422, or by email to info@sunstudio.ae. Sun Studio Dubai has been printing in Al Quoz First since 2011, with no minimum order.